
Soldering & Industrial Tool Heaters
A1321 Soldering Ceramic Heating Element (Hakko 936)
A1321 alumina ceramic heating element for Hakko 936 soldering stations. 24V, 50W, 60 × 3.8 mm, with built-in 50Ω temperature sensor.
Specifications
- Working voltage
- 24V
- Working power
- 50W ±10%
- Dimension
- 60 mm length × 3.8 mm diameter
- Heating resistance
- 3Ω ±10%
- Sensor resistance
- 50Ω ±10%
- Working temperature
- 400–500°C
- Leads
- nickel wires
- Insulation sleeve
- as required
- Application
- Hakko 936 soldering station
Fit your Hakko 936 soldering stations with the A1321 ceramic heating element. It runs on 24V and 50W, measures 60 mm long and 3.8 mm in diameter, and gives you a built-in 50Ω sensor for temperature control.
Features
- Get compact size, high power and rapid heating from ceramic lamination
- Count on higher reliability than conventional heater designs
- Work with a white alumina body (Al2O3 ≥ 95%), N6 nickel wires and Ag72Cu28 brazing
- Control your temperature precisely with the built-in sensor
Alumina material properties
- Colour: white
- Density: 3.7 g/cm³
- Water absorption: 0%
- Average grain size: 3–5 μm
- Hardness: ≥15 GPa (4.9N load)
- Flexural strength: ≥274 MPa
- Linear expansion coefficient: 6.5–7.5 ×10⁻⁶/°C (20–500°C), 6.5–8.0 ×10⁻⁶/°C (20–800°C)
- Thermal conductivity: ≥20.9 W/(m·K) at 20°C
- Specific heat: ≥0.8 kJ/(kg·K)
- Insulation strength: ≥12 kV/mm
- Volume resistivity: ≥10¹⁴ Ω·cm at 20°C, ≥10¹¹ at 300°C, ≥10⁹ at 500°C
- Permittivity: 9–10 at 1 MHz
- Dielectric loss tangent: ≤3×10⁻⁴ at 1 MHz
- Surface roughness: 0.3–0.8 μm
Custom sizes, voltages, power ratings and lead configurations are available — send us your drawing or sample for a quote.


